Call This Saturday To Get Our

Call This Saturday To Get Our $45 Drain Cleaning

$45

Drain Cleaning

Sewer Repair

$240 Discount off of Sewer Repair Service, Pipe Burst or Lining

At All Service Plumbing we do more than just clean drains. We specialize in Sewer Repair and Rehabilitation. Here are some common reasons why we would recommend repair or rehabilitation:

  • Broken, cracked, offset, or collapsed pipes: Damaged pipes due to shifting or soil setting.
  • Blockage: Grease build up or a foreign object restricting or prohibiting proper flow or cleaning of line.
  • Corrosion: Pipe has deteriorated and or broke causing collapse in the line and restricting flow.
  • Bellied Pipe: A section of the pipe has sunk due to ground or soil conditions, creating a valley that collects paper and waste.
  • Leaking Joints: Seals between pipes have broken, allowing water and waste to escape into the surrounding area
  • Root Infiltration: Tree or shrub roots have invaded the sewer line, preventing normal cleaning and damaging the sewer line.
Corroded Pipe Image

Why Trenchless Sewer Repair?

Trenchless sewer repairs offer a number of useful advantages over traditional, digging-intensive approaches to fixing sewer problems:

  • Less lawn and landscape damage. Many homeowners put a lot of love and dedication into maintaining lush green lawns and beautiful gardens, which sewer repair trenches can quickly destroy. Trenchless repairs eliminate this problem.
  • Simpler process for contractors. Trench digging is a notoriously labor-intensive process, requiring significant manpower and physical strain. For sewer repair professionals, trenchless techniques are simpler to perform, as well as less time-consuming.
  • No risk of driveway and concrete damage. When sewer lines are located below a driveway, patio, or another section of concrete, trench-based sewer repair can be seriously disruptive, and lead to significant costs to replace sections of your driveway after the repairs. This isn’t a problem with trenchless techniques.

Pipe Bursting

The basics of pipe bursting are straightforward. The pipe bursting system is dedicated equipment and there are contractors who specialize in pipe bursting as a trenchless means of pipe replacement.

  • Push the rod of a pipe-bursting system into the existing pipe. Attach bursting blades to the end of the rod and add an expander, which may be as much as 30 percent larger than the new pipe’s outside diameter, to the pipe bursting system’s rod.
  • Connect the new pipe to the expander.
  • Pull the rod back through the pipe, drawing the bursting blades through the old pipe, breaking it up. The expander, which immediately follows the bursting blades as they are pulled through the old pipe, expands the burst pipe, pushing its fragments into the surrounding earth. The new pipe is attached to, pulled by and follows the expander through the length of the existing bore.
Hydrojetting Diagram All Service Plumbing

When the bursting blades and expander leave the bore, the new pipe is in place, waiting to be connected to the appropriate service.
Pipe bursting is appropriate when a trenchless means of replacing an aging or damaged pipeline is desirable. The need for geological investigation is minimal, if any investigation is required at all.
Because pipe bursting supplants the existing pipe with new pipe as the existing pipe is destroyed, and because there’s no need to remove or dispose of the failed pipe, project time and cost is likewise minimized.

Trenchless Sewer Repair Diagram

CIPP Relining. Commonly referred to as Trenchless Sewer Lining or Sewer Sleeve:

Cure-in-place pipe (CIPP) relining is one of the most common trenchless sewer repair techniques that we use at All Service Plumbers Drain and Hydro-Jet. It’s great for fixing cracks, leaks, and other imperfections in residential and commercial sewer laterals, as well as larger municipal sewer main lines. It can also be used in underground drain pipes and water mains.
CIPP drain and sewer relining allows us to install a durable liner that patches holes and cracks inside of a buried pipe, without needing to dig a trench for access. For sewer lines, the process can be completed through manholes and sewer cleanouts.
Using a pneumatic bladder, we insert a flexible resin-coated liner that can be cured and hardened in place using hot water, steam, or UV light. Once in place, CIPP liners can last for decades.

Why choose All Service Plumbing to handle your Sewer Repair? We are the best in the industry. We are Licensed and Bonded with the City of Los Angeles to handle Engineering grade sewer rehabilitation.

Skip to content